Potting and Encapsulating Materials

Engineering Materials - Selection Guide
Controlled Volatility - Potting and Encapsulating Silicone

NuSil ID	Cure System	Work Time	Mix Ratio	Comments
CCF1-2566	Tin Condensation	1.7 H	100: 0.5	Two-part, red RTV silicone
CV-2500-2	PT Addition	3 HR	10:1	Low Viscosity Fast Cure Elastomere Black
CV-2510	Tin Condensation	4 HR	100:0.5	High / Low Temperature Flowable RTV Elastomer
CV-2564	Tin Condensation	2 H	100: 0.5	A lightweight two-part. Flowable translucent RTV silicone
CV-2566	Tin Condensation	3 HR	100:0.5	Pourable RTV Cure Primed Lap Shear 550psi (3.8MPa)
CV-2567	Tin	6.5 H	100: 0.5	Diluent for Tin Condensation CV Silicones
CV-2568	Tin Condensation	4 HR	100:0.5	Long Work Time Low Density Primed Lap Shear 100psi (0.69MPa)
CV-2900	Oxime	40 M	1 Part	RTV silicone 0.6 W/mK, Low Temperature
CV1-2566	Tin Condensation	3 HR	100:0.5	Lower Viscosity Primed Lap Shear 650psi (4.5MPa)
CV10-2568	PT Addition	3 HR	1:1	Fast Cure Low Density Primed Lap Shear 140psi (1.0MPa)
CV2-2566	Tin Condensation	2 HR	100:0.5	Thixotropic RTV Cure Primed Lap Shear 525psi (3.6MPa)